Classic
Sea Shells
Green Motifs
Delicate FloralsOthers in this category
Berger Joint Compound Interior Fine
It is a ready to use product ideal for filling surface irregularities before and after application of finish paints.
Berger Joint Compound is used for filling surface irregularities and indentations and hairline surface cracks. It produces a smooth and level surface prior to painting. It is used as joint filler for gypsum board and as a general repair filler up to 0.5mils.
Features
See all
High-performance, multi-use compound
Smooth, fast-drying application
Ready-mixed for minimal mixingSurface preparation:
- Surface should be clean, dry and free from all contaminants
- Remove old, loose flaking paint by scraping or wire brushing
- Prime with Berger Grip & Seal Multi-Surface Primer Sealer or Berger Luxatex Primer or Berger ALD Concrete Primer
Application Procedure:
- Use either a stainless steel, plastic trowel or putty knife
- When dried sand off with sandpaper to produce a smooth surface
Tips: Store in a cool dry place.
Tools you will need
Paint Brush
Plastic Trowel
Available Packs
1 Gallon
5 Gallons
1 Coat
2-3 m2/kg**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
we also recommend
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
LOCATE A DEALER
CONTACT US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.