Themes

My Profile My Library Logout
Menu
Others in this category
  • Berger Royale Luxury Interior Satin Emulsion

Berger Royale Luxury Interior Emulsion (Silk)

A rich, luxurious décor finish designed for the most discerning taste.

Home / Product Listing Page /Berger Royale Luxury Interior Emulsion (Silk)
Material Safety Data SheetWarranty BookletProduct Data Sheet
With its soft touch and smooth sheen, Berger Royale brings walls to life with the elegance and feel of exotic fabrics. Combined with the traditional attributes expected in a superior paint, virtually odourless and specially formulated with carefully selected raw materials, Berger Royale incorporates Dura-Tuf Technology, making it tough to stain, easy to clean and highly resistant to fungus and algae, whilst maintaining its beauty for 7 years.

Features

See all
Virtually odourlessSuperior stain resistanceEase of stain removal
Finishes -Silk

Surface preparation:

  • Ensure adequate ventilation during application and drying
  • Do not apply when humidity exceeds 95% and condensation is likely
  • Use up to 250 mils of clean water per 3.8L for thinning if necessary for ease of application
  • Treat any fungal growth with Berger Sterilizing Solution

 

Application Procedure:

  • By brush, roller or spray. Use clean tools and equipment
  • When applying by brush and roller apply an even coat to avoid runs and sags
  • Apply 1-2 coats
  • Remove any paint drops immediately with clean water
  • Allow at least 1 hour drying for Berger Grip & Seal Primer/Sealer
  • If the surface is previously painted ensure that dirt, stain etc. and other loose material and contaminants are removed

 

Tips: For a perfectly smooth surface apply Berger Interior Joint Compound to fill holes, cracks and imperfections.

Tools you will need

Paint Brush
Paint Roller
Spray Gun

Available Packs


1 Gallon


5 Gallons

1 Coat
9.0 m2/Ltr**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Washability

  • Best-in-class
  • High
  • Medium
  • Low

Gallery

more

Solve Potential Paint Problems

1What are those bubbles or blisters on my walls?

The bubbles or blisters on your walls are called blistering. Paint blisters or bubbles occur when there is loss of adhesion between the paint film and underlying surface.

What are the possible causes?

  • Applying oil-based paint over a damp or wet surface
  • Moisture seeping through to the exterior surface from an interior source
  • Exposure of latex paint film to moisture shortly after the paint has dried, especially in cases of poor surface preparation

What is the solution?

  • If blisters do not go all the way down to the substrate, remove by scraping and sanding
  • Repaint with premium Berger topcoat for wood or wall
  • For interior wood & wall surfaces, Berger recommends Royale
  • Blisters all the way down to the surface are a sign of a more significant source of moisture, which must be addressed before any painting can begin
  • Once resolved, remove all loose paint and repair any loose caulking
  • Allow surface to dry thoroughly before the application of an appropriate primer and a moisture resistant premium topcoat

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint
2Why are bubbles formed on the wall?

Foaming and cratering frequently occur when bubbles form. When the bubbles break during application and drying, they result in small, round concave depressions or cratering.

What are the possible causes?

  • Shaking a partially filled can of paint
  • Applying paint too rapidly, especially rolling
  • Using low-quality paint or very old latex paint
  • Using a roller cover with the wrong nap length
  • Excessively rolling or brushing the paint
  • Applying a gloss or semi-gloss paint over a painted surface

What is the solution?

  • All paints will foam to some extent during application
  • Premium quality paints are specially formulated, so the bubbles break while the paint is wet, allowing for good flow and appearance
  • Avoid excessive rolling or brushing of the paint or using old paint
  • Apply gloss and semi-gloss paints with a short nap roller
  • Apply appropriate primer/sealer when painting over a porous surface
  • Problem areas should be sanded before repainting

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion
3How do I get rid of unsightly mildew on my walls?

Mildew is both an interior and an exterior problem found in damp areas receiving little or no sunlight. It appears as black, grey, green, or brown spots on any surface.

What are the possible causes?

  • Failure to treat existing mildew before painting
  • Using lower quality paints with little or no biocide
  • Failing to prime bare wood before painting
  • Painting over a substrate or coating from which mildew has not been removed

What is the solution?

  • Treat mildew with Berger Sterilizing Solution
  • Remove mildew by pressure washing the surface
  • Allow solution to remain on surface for at least 1 hour
  • Rinse thoroughly with water and allow surface to dry before painting
  • Wear protective eyewear, protective clothing, and waterproof gloves
  • To protect against re-growth use premium quality paint
  • Clean high-moisture areas at 6 month intervals to slow re-growth

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger 303 Flat Emulsion

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger White Wood Primer

  • Second Coat
    Berger 404 Gloss Oil Paint

  • Base Coat
    Berger Sterilizing Solution

  • First Coat
    Berger Zinc Chromate Red Oxide Primer

  • Second Coat
    Berger RustPro Anti-Rust Enamel
4Why do I have a patchy paint finish?

Patchiness generally occurs when insufficient paint has been applied or when paint is applied unevenly, resulting in a variation of the film build leading to patches.

What are the possible causes?

  • Inconsistent distribution of paint on the surface
  • Incorrect or low quality paint brush or roller
  • Failure to apply a primer over joint compound
  • Applying paint over joint compound not fully dried
  • The top coat is applied over spot-puttied surfaces
  • Variations in surface gloss can cause paint to appear patchy

What is the solution?

  • Increase the amount of paint on the brush or roller to allow better distribution
  • Apply the paint in a grid fashion to ensure an even finish
  • Allow puttied wall to dry evenly before priming
  • By applying one coat of appropriate premium Berger Primer
  • Apply two coats of premium Berger acrylic topcoat
  • Refer to Berger Technical Support for primer options

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger 303 Flat Emulsion

  • Second Coat
    Berger 303 Flat Emulsion

  • Base Coat
    Berger Zinc Chromate Red Oxide Primer

  • First Coat
    Berger RustPro Anti-Rust Enamel

  • Second Coat
    Berger RustPro Anti-Rust Enamel

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint
5Why do some areas of my freshly painted walls look darker than others?

Picture framing occurs when the brushed areas appear darker than the areas painted with roller, resembling a picture frame.

What are the possible causes?

  • Applying paint at different thicknesses in brush and roller application             
  • Failure to keep a wet edge while painting
  • Incomplete mixing resulting in paint not being uniformly incorporated
  • Using a roller cover nap that is too long, which will produce a heavy texture
  • Using of different techniques in the same area, such as spraying and brushing

What is the solution?

  • Ensure similar spread rates with brushes and rollers
  • Don't cut in the entire room before roller coating
  • Work in smaller sections of the room to maintain a "wet edge"
  • Ensure correct colorant-base combinations are used
  • Ensure uniform mixing of the paint

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)
6Why hasn’t the paint stuck to the surface of my walls and wood?

Failure of paint to stick to the surface on which it has been applied and/ or to itself can be described as poor adhesion.

What are the possible causes?

  • The biggest cause of poor adhesion is poor surface preparation
  • Insufficient sanding before applying any primer 
  • Applying primer too thin
  • Diluting the primer thereby weakening its ability to stick to the surface
  • Failure to prime the surface in the first place
  • Painting wet or damp surface
  • Incompatible coatings, such as a water based coating over oil

What is the solution?

  • Use the correct type of primerfor the surface
  • Apply primer following manufacturer’s recommendations
  • Never paint on a wet or a damp surface
  • Always ensure that the area is clean, dry and free from contaminants before painting
  • Treat any surface problems before priming
  • Ensure that primers and topcoats are compatible and suitable for the surface being painted

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint
7Why didn’t the paint hide the surface beneath in two coats as recommended?

Poor hiding occurs when paint fails to obscure or hide the surface to which it is applied.

What are the possible causes?

  • Using low-quality paint with little hiding power
  • Spreading paint too thinly or unevenly
  • Over-thinning paint beyond the recommended amount
  • Failure to prime the surface before top-coating
  • Painting a porous or absorbent surface
  • Using incorrect or poor quality tools
  • Inadequately mixed paint

What is the solution?

  • Prime first, if moving from a significantly darker to a light colour
  • When painting in a dark colour, tint primer in a similar tone to the topcoat shade
  • Use premium quality paint for better hiding and flow
  • Use quality and correct tools for the job
  • Follow manufacturer's recommendation for thinning

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Second Coat
    Berger Royale Water Based Luxury Gloss Enamel

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger 303 Flat Emulsion

  • Second Coat
    Berger 303 Flat Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Zinc Chromate Red Oxide Primer

  • First Coat
    Berger RustPro Anti-Rust Enamel

  • Second Coat
    Berger RustPro Anti-Rust Enamel

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint
8Why does my paint come off the wall when scrubbed?

The easy wearing away of paint when scrubbed with a brush, sponge, or cloth is indicative of a paint which is exhibiting poor scrub resistance.

What are the possible causes?

  • Insufficient time allowed for paint to fully dry before washing or scrubbing 
  • Use of an abrasive cleaner 
  • Choosing the wrong product or sheen for the area
  • Using low quality paint
  • Overly aggressively scrubbing the painted area

What is the solution?

  • Areas requiring frequent washing will require a high quality paint formulated especially to provide such performance
  • High traffic areas may require a silk, semi-gloss or gloss rather than a flat paint
  • Allow adequate dry time, as scrub resistance will not fully develop until the paint has thoroughly cured. Typically, 5 days
  • Use non-abrasive material and mild detergent where possible

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Semi-Gloss Enamel

  • Second Coat
    Berger 404 Semi-Gloss Enamel
9Why do my walls get dirty and stained so easily?

Failure to resist absorption of dirt and stains, occurs with paint not made specifically to resist dirt and stains.

What are the possible causes?

  • A highly porous surface can lead poor stain resistance
  • Using of lower quality, flat latex paint
  • Applying paint to an un-primed surface

What is the solution?

  • Use a paint specifically designed to provide stain and dirt resistance
  • Use premium acrylic paint designed for ease of stain removal
  • Premium quality acrylic paints contain more binder, preventing stains from penetrating painted surfaces and allow for easy removal
  • Priming new surfaces provides maximum film thickness of a premium top coat

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss
10Why did the paint roller leave so many marks on my walls?

Failure of paint to dry to a smooth film, resulting in unsightly, unintentional brush or roller marks after the paint has dried.

What are the possible causes?

  • Re-brushing or re-rolling fresh paint on partially dried paint
  • Applying paint too rapidly or for too long
  • Using wrong type or poor quality brush, roller or nap size
  • Applying too thin of a paint film
  • Painting a hot surface or in direct sunlight
  • Coating a very porous surface
  • Incorrect rolling technique

What is the solution?

  • Allow paint to dry thoroughly before applying second coat
  • Wait until the paint has dried thoroughly before touching up
  • Use correct rolling or brushing technique
  • Follow label directions for appropriate quality, applicator size, and type needed
  • Follow label directions for correct film build 
  • Prime to seal porous surfaces

We recommend you use these painting systems in order of base coat, first coat, and second coat:


  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Second Coat
    Berger Royale Luxury Interior Satin Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Everglow Low-Sheen Emulsion

  • Second Coat
    Berger Everglow Low-Sheen Emulsion

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Second Coat
    Berger WeatherProof Ultra Semi-Gloss

  • Base Coat
    Berger Grip&Seal Multi-Surface Primer Sealer

  • First Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Second Coat
    Berger Royale Luxury Interior Emulsion (Silk)

  • Base Coat
    Berger White Wood Primer

  • First Coat
    Berger 404 Gloss Oil Paint

  • Second Coat
    Berger 404 Gloss Oil Paint

we also recommend

  • Get Inspiration

    Explore

  • Make Your Plan

    Let us design a project plan to suit your needs.

    Start

  • Colour Tools

    Explore
map
LOCATE A DEALER

CONTACT US

Queries & Feedback
PROJECT SALES
BERGER PAINT DOCTOR
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!