Classic
Sea Shells
Green Motifs
Delicate Florals
Berger Swimming Pool Paint
An ideal coating for ponds and swimming pools.
Berger Swimming Pool Paint has a high degree of impermeability to water and water vapour. It effectively retards the passage of moisture through the film, making it an ideal coating for ponds and swimming pools.
Features
See all
Tough resistant coating
Highly durable
Good adhesionSurface preparation:
- Power wash surface to remove loose material if repainting
- For new pools concrete must be cured and thoroughly dry in depth for at least six weeks. Moisture level less than 15%
- Remove all loose sand, mortar splashes and efflorescence
- Ensure pool has adequate damp proofing behind the wall
- For proper adhesion acid-etch surface with Berger Concrete Etching Solution
- Wash surface with fresh clean water to ensure all un-reacted acid is removed
Application Procedure:
- Apply one coat of Berger Swimming Pool Paint, thinned 20% with Berger No.3 Reducer; allow to dry overnight
- To control cob webbing use 2 coats
- Allow to dry at least 18 hours between coats
- Allow at least seven days drying in optimum conditions prior to filling
Tips:
- Spot-prime any newly repaired areas with paint or where the substrate is showing
- Clean brushes with Berger No. 3 Reducer
Tools you will need
Spray
Roller
Paint Brush
Available Packs
1 Gallon
1 Coat
7-7.5 m2/ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
LOCATE A DEALER
CONTACT US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.