Berger Polyurethane Gloss varnish is a single component, high-solids, interior varnish that is easy to apply and has been specially formulated to provide a long-lasting finish that is highly resistant to scratches, alcohol, abrasion, water, food stains, grease and detergents.
Features
See allAnti-Fungal and Anti-Algal PropertiesExcellent coverageEasy to apply single component varnish
Surface preparation:
- Surface must be free of contaminants such as grease, oil, wax or mould
- Clean contaminated surfaces with lacquer thinner, or other appropriate solvent
- Wipe clean before the solvent dries
- Clean surfaces before sanding to avoid sanding contaminant into the surface
- Sand with 80-grit paper
Application Procedure:
- Apply 1 to 2 coats of WOODCARE Polyurethane Gloss Varnish
- May be applied to bare or stained wood
- Allow first coat to dry before applying a second
- Apply two or three coats of varnish following the manufacturer's recommendations
Tips: Sand with 120 grit-150-grit as it provides a good tooth for varnish adhesion, and coats of varnish easily fill minor scratches.
Tools you will need
Available Packs
1 Coat
9-10 m2/ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
we also recommend
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
LOCATE A DEALER
CONTACT US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.