Features

Surface preparation:

• Surface must be clean, free contaminants, mould and mildew
• Scrape off loose paint and sand to a smooth surface
• New plaster must be cured at least 30 days before priming
• For adhesion on glossy surfaces, scuff sand surface thoroughly before priming
• Treat fungus and algae with Berger Sterilizing Solution

Application Procedure:

• Ready-to-use formulation
• Apply by brush, roller or sprayer
• No mixing required
• Stir thoroughly before and occasionally during use
• Dilute no more than 10% water for spray application
• Prime the entire surface to ensure a uniform appearance of the topcoat
• Berger ALD Concrete Primer is tintable
• Tinting recommended in a lighter shade than the topcoat when painting dark colours
• Application in wet humid conditions will slow drying time

Tips: Primers provide an extra wear-layer and facilitate adhesion of the topcoat to its surface, and are ideal especially in cases of extreme exposure.