Features

Surface preparation:

• Clean surface, removing all dirt, dust & grease
• Matt surface for better adhesion
• Sand new or stained wood lightly to a smooth finish
• If staining, allow to dry 24 hours before varnishing
• Remove old varnish in poor condition with Sandpaper
• Clean and matt the gloss of varnish in good condition

Application Procedure:

• Stir well before and occasionally during use
• Before applying check effect by testing on an extra piece of the same wood
• Apply a uniform, thin coat using high quality, clean polyester or natural bristle brush
• Brush in even strokes in the direction of the wood grain
• Use care on vertical surfaces to avoid runs
• Allow to dry 24 hrs and sand lightly
• Remove all sanding dust before applying 2nd coat
• For best results, apply at least 2-4 coats

Tips: Avoid application in direct sunlight or when rain is threatening or late in the day when dew may affect drying time.