Classic
Sea Shells
Green Motifs
Delicate FloralsOthers in this category
Woodtech Oil Based Wood Stain
Beautify and protect wood surfaces while enhancing their natural beauty with WOODTECH Oil-Based Wood Stain.
WOODTECH Oil Based Wood Stains penetrate wood to provide waterproofing protection for up to two years on decks and up to four years on interior surfaces, and is available in trendy and traditional colours, as well as tintable in hundreds of shades. In addition WOODTECH Oil Based Wood Stain un-tinted clear base on its own also serves as a sealer to any of these stains. WOODTECH Oil Based Wood Stain is a semi-transparent stain that will provide the colour you want in 1, 2 or 3 coats as desired and will still allow the beauty of the woodgrain to be seen.
Features
See all
Anti-Fungal and Anti-Algal Properties
For interior and exterior use
Penetrates wood to provide protectionSurface preparation:
- Surface must be clean, dry and free of contaminants
- Remove loose wood fibres, latex, oil-based and acrylic coatings on new or weathered wood
- Sand light to medium exterior stains caused by mould, mildew, algae & fungus
- Treat residual fungus and algae with Berger Sterilizing Solution
Application Procedure:
- Do not use if rain is expected within 24 hours
- Bare wood surfaces must be completely dry
- Made ready to use
- No thinning required
- Stir product occasionally throughout application
- Use natural bristle, synthetic filament brush, or pad applicator
- Rolling on rough surfaces only
- Use a 3/8" nap roller
- A high quality pump sprayer may be used
- Work in small sections to saturate wood
- Maintain a wet edge and always back-brush
Tips: For optimum performance, coat wood on all sides. Over application will lead to surface failure, peeling and cracking. Avoid applying stain too heavily.
Tools you will need
Paint Brush
Paint Roller
Spray Gun
Available Packs
1 Gallon
5 Gallons
1 Coat
9-10 m2/ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
we also recommend
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
LOCATE A DEALER
CONTACT US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.