Classic
Sea Shells
Green Motifs
Delicate Florals
Woodtech Polyurethane Satin Varnish
Woodtech Polyurethane Satin varnish is easy to use right out of the can with no component mixing required.
Berger Polyurethane Satin varnish is a single component, high-solids, interior varnish that is easy to apply and has been specially formulated to provide a long-lasting finish that is highly resistant to scratches, alcohol, abrasion, water, food stains, grease and detergents.
Features
See all
Anti-Fungal and Anti-Algal Properties
Excellent coverage
Easy to apply single component varnishSurface preparation:
- Surface must be free of contaminants such as grease, oil, wax or mould
- Clean contaminated surfaces with lacquer thinner, or other appropriate solvent
- Wipe clean before the solvent dries
- Clean surfaces before sanding to avoid sanding contaminant into the surface
- Sand with 80-grit paper
Application Procedure:
- Apply 1 to 2 coats of WOODTECH Polyurethane Satin Varnish
- May be applied to bare or stained wood
- Allow first coat to dry before applying a second
- Apply two or three coats of varnish following the manufacturer's recommendations
Tips: Sand with 120 grit-150-grit as it provides a good tooth for varnish adhesion, and coats of varnish easily fill minor scratches.
Tools you will need
Paint Brush
Paint Roller
Spray Gun
Available Packs
1 Gallon
5 Gallons
1 Coat
9-10 m2/ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Tools
LOCATE A DEALER
CONTACT US
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.